Quadriplegic & Paraplegic Spinal Cord Injuries: They Say It Can't Be Fixed... - Quadriplegic & Paraplegic Spinal Cord Injuries

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

They Say It Can't Be Fixed... Chair damaged in auto accident Rate Topic: -----

#1 User is offline   Kwag_Myers 

  • Member
  • PipPip
  • Group: Members
  • Posts: 720
  • Joined: 28-November 07
  • Gender:Male
  • Country:South-East Michigan
  • Spinal Injury Level / Relationship:T12 Incomplete/CES

Posted 05 September 2010 - 11:24 PM

My Ki Catalyst 5vx was damaged in a car accident, so I took it to the dealer to get if fixed. They said, "We're not comfortable fixing the chair. It can be repaired, but it will never be the same." and recommended I replace the chair. Personally, I don't see that much damage and I'm a little suspicious. From what I can see, one foot rest stem is bent and the rest is cracked, there's a broken thing under the seat that I think ties the cross-member to the frame, and the tube part of the seat support is bent. I don't see anything wrong with the wheels or frame. What do you guys think?

Attached Image: footrest.jpg
Attached Image: seat.jpg
Attached Image: support.jpg

Yeah, I know...I take lousy pictures.
'Cause that's how I roll! Posted Image
0

#2 User is offline   rowena u 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 29
  • Joined: 22-April 10
  • Gender:Female
  • Country:philippines
  • Spinal Injury Level / Relationship:paraplegic

Posted 06 September 2010 - 04:17 AM

It sure looks bent and needs fixing. But it was designed to perfectly fit together. Hence any repair when its metal could not be the same. Whether fitting form or the strength to carry weight. If you can afford it, then replace. Anyway was not insured, considering it was part of a car accident? Hope this could help you.
0

#3 User is offline   xxm 

  • Member
  • PipPip
  • Group: Members
  • Posts: 208
  • Joined: 26-January 09
  • Gender:Male
  • Country:Bulgaria
  • Spinal Injury Level / Relationship:C6/C7

Posted 06 September 2010 - 08:29 AM

If it was mine I'll do as follows:

1. Disassemble chair and take the bent part of the seat.
2. Take out plastic plugs of the bent tube.
3. Fit the tube on a mechanics vice.
4. Find two metal rods about 30"-40" long exactly fitting inside bent tube and put them inside two ends.
5. Straighten the bent tube applying hand force to rods. As longer the rods as little force needed.

The same can be done by two tubes fitting outside bent tube.

Good luck
Rudy
Nobody's Pain Can Be Shared.
0

#4 User is offline   dangerousdave 

  • Advanced Member
  • PipPipPip
  • Group: Closed Account
  • Posts: 4,180
  • Joined: 23-September 09
  • Gender:Male
  • Country:uk
  • Spinal Injury Level / Relationship:l2/l3

Posted 06 September 2010 - 09:39 AM

Without seeing the frame in the flesh so to speak
I think you have been wisely advised
If you strip it down to metal tubes and try to straighten them - can do
But some tubes are heat treated and you may end up cracking them - especualy in welded areas
So just include it in a insurance claim
0

#5 User is offline   edlee 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 3,728
  • Joined: 17-March 07
  • Gender:Male
  • Country:South Western Pa
  • Spinal Injury Level / Relationship:t-10 complete

Posted 06 September 2010 - 09:00 PM

Insurance first,,,If auto insurance won't cover it,, many home owner policies cover damage to personal property ( that's what it is, after all) away from home. If none of that applies making your own repairs may be feasable. Even with aluminum, slight bends can be staightened,, done carefully and slowly, using Rudy's description as a guide.

The bends shown in the pictures don't look outreagous, so it seems it would be possible.

Gotta tell ya, tho,,, if I owned a shop,, I wouldn't fix it either. Too much chance of a liability lawsuit. Maybe you have a friend with a vice.
ed
0

#6 User is offline   Quad65 

  • Member
  • PipPip
  • Group: Members
  • Posts: 464
  • Joined: 17-April 08
  • Gender:Male
  • Country:Zimmerman, MN USA
  • Spinal Injury Level / Relationship:C5-C6 Quad

Posted 07 September 2010 - 04:17 PM

Go new. No muss, no fuss. Bending metal back into shape will weaken it further. It will never be the same, even with skilled hands doing the work.
-- Whatever doesn't kill you, makes you want to get even real bad.
0

#7 User is offline   Tim13 

  • Member
  • PipPip
  • Group: Members
  • Posts: 515
  • Joined: 20-April 07
  • Country:Sunny Florida
  • Spinal Injury Level / Relationship:T-12

Posted 07 September 2010 - 04:32 PM

View PostKwag_Myers, on 05 September 2010 - 11:24 PM, said:

My Ki Catalyst 5vx was damaged in a car accident, so I took it to the dealer to get if fixed. They said, "We're not comfortable fixing the chair. It can be repaired, but it will never be the same." and recommended I replace the chair. Personally, I don't see that much damage and I'm a little suspicious. From what I can see, one foot rest stem is bent and the rest is cracked, there's a broken thing under the seat that I think ties the cross-member to the frame, and the tube part of the seat support is bent. I don't see anything wrong with the wheels or frame. What do you guys think?

The dealer probably lacks the skill to repair that type of damage and would prefer to sell you a new one anyway.
Looks like an easy fix using a combination of replacement parts and/or a shop that builds custom bikes, fences or other type of metal fab.
Even if the insurance will cover a new one, you should try and keep it around for backup or spare parts.

$0.02
0

#8 User is offline   dangerousdave 

  • Advanced Member
  • PipPipPip
  • Group: Closed Account
  • Posts: 4,180
  • Joined: 23-September 09
  • Gender:Male
  • Country:uk
  • Spinal Injury Level / Relationship:l2/l3

Posted 08 September 2010 - 09:12 AM

The main problem seen in his pics is that the welded box area around the axil looks bent
straightening that area could result in cracks around the welds and that x frame stay looks unhealthy
As I said earlier - without looking at the frame it is hard to judge
The saving grace is - if you try to straighten it - you cant end up any worse then you are now
0

#9 User is offline   Kwag_Myers 

  • Member
  • PipPip
  • Group: Members
  • Posts: 720
  • Joined: 28-November 07
  • Gender:Male
  • Country:South-East Michigan
  • Spinal Injury Level / Relationship:T12 Incomplete/CES

Posted 08 September 2010 - 01:41 PM

Thx for all your feedback. After a week of un-returned phone calls I finally got someone in sales to talk to me. Turns out the frame is actually tweaked a bit and it's cheaper to buy a whole chair than just the frame. Anyway, I didn't care for the color, so...

As for insurance, I currently don't have health, and the car wasn't worth anything, so no collision coverage. Home owner's is covering the damage, but there's a $500 deductible. However, under Michigan law I can submit a claim to the other driver's insurance for the deductible. I just have to front the deductible until I collect.
'Cause that's how I roll! Posted Image
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users