Wheels a bit flat ..decided to pump them up..were fine...now air going in and OUT the rims....
Spinergy ....ANY IDEAS?? In a bit of a panaic as have to be at work early tomorrow.......
All ideas welcome.
cheers!!
xx
Page 1 of 1
help....flat wheel!!!
#2
Posted 03 July 2006 - 08:42 PM
Is the tyre going flat or is it staying hard but you could (for a while) hear air coming out while you pumped it up? If the latter don't worry
- sometimes there's air between the tyre and the inner tube which has to go somewhere if the inner tube is pumped up. If the former you've got a flat
This post has been edited by russ1: 03 July 2006 - 08:42 PM
Russ - T2complete
#3
Posted 03 July 2006 - 08:56 PM
russ1, on Jul 3 2006, 09:42 PM, said:
Is the tyre going flat or is it staying hard but you could (for a while) hear air coming out while you pumped it up? If the latter don't worry
- sometimes there's air between the tyre and the inner tube which has to go somewhere if the inner tube is pumped up. If the former you've got a flat 
Thanks for the reply. Tyre was a bit soft but fine..brother-in-law..was trying to pump it up...and got it completely flat instead....(it's an american chair..imperial so a bit of messing around with connections)
brought it down to the garage...connections all good..but air coming out the rims..flat as apancake
#4
Posted 04 July 2006 - 07:21 PM
sorted today...valve problem!!!...
#5
Posted 09 July 2006 - 03:49 AM
You can still get around with a flat. It's annoying and you have to go slower than usual. Plus, it tends to scratch and nick the wheel. I've done it for a couple days before.
Share this topic:
Page 1 of 1

Help












