Any Monoskiers Out There? Won't be long before skiing begins in Uostate NY
#1
Posted 16 November 2007 - 12:57 AM
#2
Posted 25 November 2007 - 05:40 PM
#3
Posted 25 November 2007 - 07:14 PM
Cant stand myself back up when I fall over more than about 1 time in 3 either :-(
I ski a praschburger that I got second hand. Ski is the one that came with it - it's a 172 about 18m turn radius I think. Seems to work ok.
#4
Posted 26 November 2007 - 12:39 AM
The other big adjustment I made is getting a new shock built for the sitski, the ones they come with are pretty basic and dont hold up to much punishment. I got a dual spring shock made with more travel and so far it has been amazing, much more control.
As far as ski's go, I have different lengths for different conditions and obviously slalom ski's for slalom races, GS ski's for GS races etc.
If you want to make a big improvement in you skiing then I would really suggest getting a slalom race ski, or at least a short ski with a narrow waist that is slalom-ish. The sidecut will make turns much easier and the shorter length (preferably 155cm) will give you much tighter turns too(about 10m radius). Keep the edges set to a side of 2 degress and a base of 1 degree for everyday skiing, and keep them sharp. You will blunt the edges much quicker in a sitski, and should run them over with a diamond stone after each day on the slopes to keep them in good shape.
I'm a low para so getting in and out independently isnt a problem for me but I know a few quads who have worked out a good system for getting in themselves too. A few tips are to make sure you get the sitski up against a bench or railing to stop it sliding, wedge the wheelchair against it too, you can also close the outriggers and jam them into the snow then push the handles under the bucket to act as an extra support and stop everything from sliding around.
Good luck this season and enjoy the snow!
#5
Posted 26 November 2007 - 02:10 AM
#6
Posted 19 December 2007 - 12:43 PM
#7
Posted 20 December 2007 - 01:21 AM
They will be able to put you in touch with a dealer fairly close to you who will measure you up and get everything ordered so that praschberger can make it all to fit.
It will normally take at least a month for manufacture the ski and get it out to you after you have been measured up.
At the moment I think the prasch is going for about £2k.
Even if you arent interested in racing, get them to mount the racing shock absorber on your unit, if you can afford it, it has much finer adjustments and gives a WAY better ride (not just comfort but control).
If you get on to them asap then you should have it with enough time to get some turns in before the end of this season.
Go for it!
#8
Posted 24 December 2007 - 02:05 AM

Go Skiing!!
This post has been edited by pawperso: 25 December 2007 - 12:27 AM
#9
Posted 25 December 2007 - 03:57 AM
#10
Posted 26 December 2007 - 11:44 PM
mjrcpd, on Nov 25 2007, 12:40 PM, said:
I used to use a milk crate with parts clearanced from the bottom for the Grove's suspension, you can sit on it just like a park bench/picnic table...I lifted the idea from ? at Loon NH (xcelent program btw)...I just bought a KBG last year and it blows away the Grove's suspension though it does sit a bit higher and is unforgiving if you get caught flat ski mid turn...phwaapp...high side
FYI...www.trailsideskiclub.org has a lodge right by Sugarbush VT with accessable rooms/bath etc...
#11
Posted 27 December 2007 - 12:46 AM
fyi latest adrenalin obsession is karting...fills in for the summer thrills...check out www.gimpspeed.com
I've also cat skied with the folks at Crested Buttes adaptive program Big Mountain Sessions...
#12
Posted 13 July 2008 - 03:34 PM
#13
Posted 04 February 2009 - 04:22 AM
Also, has anyone here ever used the Shadow mono ski? I've found a used one that I'm considering buying but would like to know of people's experiences with it and whether or not it sucks!
http://www.twitter.com/twisted_ophelia

Help











